Reasons for water ripples in blister packaging:
In the production process of blister packaging sheets, due to different blister packaging materials and processing techniques, the surface of the finished blister packaging sheets produced has water ripples, especially in the production process of transparent blister packaging sheets. If the water ripple is too large, it will be regarded as a defective product. In general, the thicker the blister packaging sheet, the more obvious the water ripples. Qualified PET blister packaging materials rarely have water ripples, but most PVC blister packaging materials have water ripples.
This kind of water ripples generally appear in the plane of the blister packaging with a relatively high plane and no pits. This is because in the production process of the blister packaging, the smooth blister packaging sheet after heating is produced in contact with the blister packaging mold. The flat surface of these blister packaging molds is relatively high and there is no pit pattern, so that the smooth material in blister thermoforming has no shrinkage space on the surface of the blister packaging mold, so water ripples are generated, which are usually difficult to avoid. Yes, this water ripple can only be reduced by modifying the blister packaging mold or improving the process.
How to improve water ripples in blister packaging:
1. Modify the blister packaging mold: modify the entire smooth plane to a plane with pit patterns, which can greatly optimize the water ripples of the blister packaging products
2. Change the blister packaging mold: Usually, the more common blister packaging molds are: copper mold and aluminum mold. Since the surfaces of these two molds are relatively smooth, this kind of water ripple is more serious. It needs to be changed to a resin mold that is rarely used. Because the surface of the resin mold is relatively rough, it has a great effect on overcoming the water ripples.
3. Change the machine: The rapid blister machine is usually used in the production of blister packaging. The advantage of the rapid blister machine is that the production is stable and the speed is fast. It is a common machine for the production of blister packaging. The effect is relatively poor. At this time, the single-head machine that is rarely used can be used. Because this machine is formed in the form of a walking furnace and the molding time is slow, this kind of machine is very useful for overcoming water ripples. Effective.







